• 产品简介
• 图片展示

PRODUCT FEATURES                                                                                                                               

Relying on our deep technical background in the large-sized TV LCD frozen 

separating equipment manufacturing field, our company developed a series 

of ultra low temperature frozen separator machines for TV LCD screens repair, 

rework, refurbishment, recycling, etc. 65inch large-sized TV LCD frozen separator 

machine is very suitable for 65 inch, 60 inch, 55 inch and other smaller size 

TV LCD screens repair, recycling, refurbishment, rework, etc. 

This machine can be used not only in the field of large-sized planar TV LCD screen 

separation field, but also in the large-sized curved TV LCD screen separation field. 

The lowest temperature of the machine can reach up to -150℃ without using liquid 

Nitrogen as refrigerant. It can easily separate out TP, cover-panel, backlight, bracket, 

OCA, LOCA from the damaged large-sized TV LCD modules. No need to change the polarizer film.

Both OCA and LOCA full lamination process TV LCD screens can be easily separated by means of ultra low temperature freezing method, 

while the TV LCD screen with SCA full lamination process can hardly be separated even if put it into liquid Nitrogen.

High efficiency, energy saving and environmental protection. No components damage during the TV LCD module separating process.

1、For 1 piece of large-sized TV LCD module with 4mm thick glass, it can be completely separated after freezing for about 30 minutes with our machine.

2、For 1 piece of large-sized TV LCD module with 1mm thick glass, it can be completely separated after freezing for about 15 minutes with our machine.

3、If put 2 pieces of large-sized TV LCD modules with 4mm thick glass in our machine at the same time, these 2 LCD modules can be completely separated after freezing for not more than 45 minutes.

4、If put 2 pieces of large-sized TV LCD modules with 1mm thick glass in our machine at the same time, these 2 LCD modules can be completely separated after freezing for not more than 25 minutes.

5、If put 3 pieces of large-sized TV LCD modules with 4mm thick glass in our machine at the same time, these 3 LCD modules can be completely separated after freezing for not more than 60 minutes.

Note: The maximum capacity of our machine is to separate 3 pieces of large-sized TV LCD modules with 4 mm thick glass at a time.

6、If put 3 pieces of large-sized TV LCD modules with 1mm thick glass in our machine at the same time, these 3 LCD modules can be completely separated after freezing for not more than 45 minutes.

The maximum capacity of our machine is to separate 6 pieces of large-sized TV LCD modules with 1mm thick glass at a time. The corresponding freezing time will be not more than 60 minutes.

Remarks: For each piece of large-sized TV LCD module, the corresponding separating time will be not more than 1 minute.  The LCD module separating efficiency will be greatly improved if users can properly operate the separator machine.

The above results are our on-site experimental data and for user reference only.

Unique leading technology. ODM $ OEM customization services are available for all users.                                                                               

Operation Procedures:

1. For serious crushed glass, please stick a tape on glass for safety and good for machine

2. Please make sure the operator wears gloves in case of danger.

3. Before using, it will take the machine around 55～60 minutes to cool to the default working temperature.

4. Place the TV LCD screen in the frozen area. 

5. Freezing time from 30 minutes to 35 minutes depends on different full lamination processes TV LCD screens.

6. Separate out TV LCD screen with some auxiliary tools.

Below is the URL of youtube video link for your reference:

https://www.youtube.com/channel/UCpXgF19dgOMtxk4wz49-yBw

Tips:

1.) It is much easier to separate out the bracket and other components after freezing processing. Please pay attention to the backlight water inlet.

2.) After separating the TV LCD screen, pay attention to the water treatment and temperature recovery.

3.) When separating the curved TV LCD screen, the separation risk caused by the temperature difference between 2 sides of the curved surface 

screen. Please pay more attention to this point.

4.) After TV LCD separation, please put the glue side upward to avoid sticking on the article surface after the temperature return to the normal.

                                                                                      Product Application

                                                                   Product Details

Imported high precision microcomputer temperature controller, precise temperature control  +  Visual man-machine interface with bilingual 

switching function in Chinese and English.